[BRAND NAME] [COLOR] Metal Embossed Logo

[BRAND NAME] + [COLOR]. Create a premium logo materialization from the perspective of a Senior CGI Artist and Brand Identity Director. The reference effect is a logo mark pressed outward from behind a metallic or matte surface, like a reverse-side die stamp, luxury-packaging hallmark, or raised seal on an official document. The logo is not a separate object placed on the surface; it is the raised relief, bulge, and outward protrusion of the surface itself. Analyze four elements before execution: - LOGO GEOMETRY: Identify the simplest, scalable primary icon mark for [BRAND NAME]. - COLOR PALETTE: Use [COLOR] to build a complete tonal system from specular highlights to the deepest shadows, and determine a warm, cool, or neutral mood. - SURFACE MATERIAL: Use [COLOR] to choose brushed or circular-grain steel, warm brushed metal with radial grain, anodized aluminum, matte carbon fiber, matte ceramic, chalk plaster, or saturated anodized colored metal. - LIGHT DIRECTION: Choose one light angle that best reveals the emboss topography. Surface: Use one single continuous material surface. Fill the entire canvas with the same physical plane rather than placing an object over a background. Keep the center brighter and let all four edges darken naturally. If the material is metal, include radial or concentric grain and add a fine, uniform grain texture equivalent to ISO 800. Relief: This is the critical requirement. The [BRAND NAME] logo mark must be a full bas-relief. Its complete filled silhouette must rise outward from the surface as one unified solid mass; not just outline, not stroke path. The interior must not be hollow or open; the complete logo shape rises to a uniform height. Gently dome the top face and use a smooth beveled wall along the edges. Recess internal negative spaces, such as a bite or letter counters, back to the flat surface level or slightly below, with inward bevels. Make the relief as substantial as a thick coin or heavy embossed seal. Keep the logo geometry faithful to the actual [BRAND NAME] mark, with correct proportions and silhouette. Lighting: Use a soft area light from the upper left at 10 to 11 o'clock. Let [COLOR] determine cool white, warm amber, or neutral daylight. Add only 10-15% subtle fill from the lower right. Use no hard shadows, no spotlight pools, and no rim light. Typography lockup: On the same surface below the relief, place a minimal typographic lockup: a small flat [BRAND NAME] logo mark; the [BRAND NAME] wordmark beneath it in a clean geometric sans-serif with spaced capitals; and an automatically generated short italic or light-weight descriptor line, which may state the founding year, product category, brand division, or core tagline. Tech specs: The logo must read as PUSHED OUTWARD FROM the surface. It is incorrect if it looks like a floating 3D object, a depression, or a cut-out hole. Ray Tracing enabled for accurate self-shadowing. No Depth of Field; keep the surface sharp from edge to edge. Preserve highlight detail. Use uniform film grain. No chromatic aberration, No lens distortion, No added vignette. Anti-aliasing maximum. Mood: A maker's hallmark, foundry seal, or luxury embossed cover, emphasizing quiet confidence and materiality.